Tried everything? Learn how to increase water pressure with a water pressure booster pump
Do you have low water pressure even though the pipes are new? There are several possible causes, but if nothing else works, install a water pressure booster at the water meter.
Usually, poor water pressure is caused by obstruction or clogged pipes. But if you’ve already replaced them or have a newer house with new pipes, try the obvious first. Make sure the shutoff valves near the water meter are fully open. Then check the water pressure. If your house is on city water, ask your local water department for a pressure reading. A reading of 45 to 55 psi is ideal.
Or you can test the water pressure yourself with a pressure gauge (sold at home centers). Hook up the gauge to an outside water spigot, turn on the water, and you’ll get an instant reading. If the reading is low, the city may be delivering water at a low pressure (less than 40 psi). If the city isn’t likely to help but consider installing a water pressure booster system, starting at Pumps of Tennessee, or online visit us at https://Pumpsoftennessee.com. We can help you with all your pump needs. If you install it yourself, apply for a plumbing permit so your work will be inspected. Some municipalities require a reduced pressure and backflow preventer to be installed when a water pressure booster is hooked up.
Call us for any of your water needs